Transformer Accessories and Raw Materials:
Iran Transfo manufactures high quality transformer components & accessories such as bushings, insulator materials, transformer oil, off-circuit tap changer, radiators, etc.
Showing 1–12 of 16 results
Bushing current transformers
Protection current transformers (PPX) Measuring current transformers Multi-core current transformers Current transformers with multi-terminal secondary
Protection current transformers (P, PX)
Measuring current transformers
Multi-core current transformers
Current transformers with multi-terminal secondary
Butterfly Valve – wafer type
• 100% assured for sealing and leakage
• Valves can be ¬xed to the transformer ange with 8 special bolts
• Indicate disc position
• Adequately protected against the corrosion
Butterfly Valve-DN80
• The aluminum casted valve is designed for mounting
• Between Flanges of the transformer tank and radiators.
• Resistant against 2 bar air pressure
• Resistant against 1bar 90 C 30 min transformer oil
C.T Terminal box
• Terminals up to 12
• Protection degree: IP65
• Terminal box body: Aluminum LM24
• Terminals: Polyamide 6.6
• Powder coat with polyester resin according to the ITQ-MP03-01 standard for air side
• Resistant against 1bar 90 C 30 min transformer oil
Continuously Transposed Cables
• All specifications of enameled rectangular wire are controlled acc. to IEC 60317 and tests made acc. to IEC 60851
• The transposed cable is delivered on a wooden reel, uniformly distributed and tightened.
Cut-out fuse insulators
11 kV cut-out fuse insulator, 24 kV cut-out fuse insulator (creeping distance 340 and 380 mm)
11 kV cut-out fuse insulator
24 kV cut-out fuse insulator
(Creeping distance: 340 and 380 mm)
Dehydrating Breathers Material
Injected aluminum upper part Injected aluminum lower part Standard color Electrostatic powder coating Dehumidifier chambers are produced according to DIN 42567 standard
Top section: casted aluminum
Bottom section: casted aluminum
Standard painting: Electrostatic coating
Dehydrating Breathers are produced acc. to DIN 42567
Low voltage insulators
Wheel insulators (ANSI C293) Block insulators (ANSI C294)
Wheel insulators (ANSI C29.3)
Insulators (ANSI C29.4)
Magnetic Oil Indicators Material
• Case: casted aluminum
• Case paint: Electrostatic (shaded acc. to order)
• Indicator dial: Aluminum
• Indicator glass: polycarbonate
• Float: Nitrofil
• Magnetic Oil Indicators are produced acc. to DIN 42269
Needle insulators
11 kV needle insulator, 20 kV needle insulator (creeping distance 385, 432 and 480 mm)
11 kV needle insulator
20 kV needle insulator
(Creeping distance: 385, 432 and 480 mm)
Oil Thermometers
• Ambient temperature: – 40 C to 80 C
• Pressure: – 50 Kpa to 200 Kpa
• Insulation test: 2000 V 50HZ to earth: 60 s
• Protection class: IP 54
One-way safety valve
Performance 70 to 100 liters per minute, DN804×M16Ø160, aluminum body material, AlSi7Mg 06 ST685 HPS, protection degree IP67