Transformer Accessories
Showing all 10 results
Butterfly Valve – wafer type
• 100% assured for sealing and leakage
• Valves can be ¬xed to the transformer ange with 8 special bolts
• Indicate disc position
• Adequately protected against the corrosion
Butterfly Valve-DN80
• The aluminum casted valve is designed for mounting
• Between Flanges of the transformer tank and radiators.
• Resistant against 2 bar air pressure
• Resistant against 1bar 90 C 30 min transformer oil
C.T Terminal box
• Terminals up to 12
• Protection degree: IP65
• Terminal box body: Aluminum LM24
• Terminals: Polyamide 6.6
• Powder coat with polyester resin according to the ITQ-MP03-01 standard for air side
• Resistant against 1bar 90 C 30 min transformer oil
Continuously Transposed Cables
• All specifications of enameled rectangular wire are controlled acc. to IEC 60317 and tests made acc. to IEC 60851
• The transposed cable is delivered on a wooden reel, uniformly distributed and tightened.
Dehydrating Breathers Material
Injected aluminum upper part Injected aluminum lower part Standard color Electrostatic powder coating Dehumidifier chambers are produced according to DIN 42567 standard
Top section: casted aluminum
Bottom section: casted aluminum
Standard painting: Electrostatic coating
Dehydrating Breathers are produced acc. to DIN 42567
Magnetic Oil Indicators Material
• Case: casted aluminum
• Case paint: Electrostatic (shaded acc. to order)
• Indicator dial: Aluminum
• Indicator glass: polycarbonate
• Float: Nitrofil
• Magnetic Oil Indicators are produced acc. to DIN 42269
Oil Thermometers
• Ambient temperature: – 40 C to 80 C
• Pressure: – 50 Kpa to 200 Kpa
• Insulation test: 2000 V 50HZ to earth: 60 s
• Protection class: IP 54
One-way safety valve
Performance 70 to 100 liters per minute, DN804×M16Ø160, aluminum body material, AlSi7Mg 06 ST685 HPS, protection degree IP67
RADIATORS
• Manufacturing transformer radiators based on Tech-specs and requirement of costumers
• The welded radiators are tested under a pressure of approx. 2 bar
• Manual blast cleaning unit to prepare a good surface for painting
• All radiators packed on wooden pallets or inside wooden boxes and fastened with steel strips
Voltage adjustment switch
Voltage 24 and 36 kV, number of steps 3 and 5, current 30 and 63 amps, base length L70 and L100, IEC 602141 standard
Voltage: 24 and 36 kV
Number of stairs: 3 and 5
Current: 30 and 63 amperes
Base length: L70 and L100
Standard: IEC 60214-1