Showing 1–12 of 45 results
Arc Furnace Transformers
Arc furnace transformers have distinctive specifications such as high current in low voltage side and special loading sequence. Thus, comprehension of high current behaviors such as Foucault currents, even distribution in parallel conductors
Bushing current transformers
Protection current transformers (PPX) Measuring current transformers Multi-core current transformers Current transformers with multi-terminal secondary
Protection current transformers (P, PX)
Measuring current transformers
Multi-core current transformers
Current transformers with multi-terminal secondary
Butterfly Valve – wafer type
• 100% assured for sealing and leakage
• Valves can be ¬xed to the transformer ange with 8 special bolts
• Indicate disc position
• Adequately protected against the corrosion
Butterfly Valve-DN80
• The aluminum casted valve is designed for mounting
• Between Flanges of the transformer tank and radiators.
• Resistant against 2 bar air pressure
• Resistant against 1bar 90 C 30 min transformer oil
C.T Terminal box
• Terminals up to 12
• Protection degree: IP65
• Terminal box body: Aluminum LM24
• Terminals: Polyamide 6.6
• Powder coat with polyester resin according to the ITQ-MP03-01 standard for air side
• Resistant against 1bar 90 C 30 min transformer oil
Cast Resin Distribution Transformers
Cast resin distribution transformers can be used in distribution network instead of oil transformers, because of their high safety conditions, distribution substations can be designed nearer to the places of the consumers.
Continuously Transposed Cables
• All specifications of enameled rectangular wire are controlled acc. to IEC 60317 and tests made acc. to IEC 60851
• The transposed cable is delivered on a wooden reel, uniformly distributed and tightened.
Cut-out fuse insulators
11 kV cut-out fuse insulator, 24 kV cut-out fuse insulator (creeping distance 340 and 380 mm)
11 kV cut-out fuse insulator
24 kV cut-out fuse insulator
(Creeping distance: 340 and 380 mm)
Dehydrating Breathers Material
Injected aluminum upper part Injected aluminum lower part Standard color Electrostatic powder coating Dehumidifier chambers are produced according to DIN 42567 standard
Top section: casted aluminum
Bottom section: casted aluminum
Standard painting: Electrostatic coating
Dehydrating Breathers are produced acc. to DIN 42567
Distribution transformers with on-load tap changer
Distribution transformers with on-load tap-changers ensure that the voltage in public and industrial distribution grids remains stable by balancing fluctuations in the medium voltage and dynamically reacting to supply and load changes in the low voltage.
Double Floor Substations
Technical Specifications:
• Up to 1000 KVA / 36KV
• Easy accessibility to components
• Optimum layout
• Corrosion proof
Earthing Transformer
The main duty of earthing transformers is to provide neutral point for delta side of the main transformer. Winding connection of these transformers are zigzag, also they could have a secondary winding to perform as auxiliary transformer in substations.